CASE STUDY

Bringing Buster the Pothole Man into Three Dimensions

WhiteClouds created Aquaphalt’s Buster mascot as a 6-foot-7-inch trade-show statue, developing the 3D form from the company’s 2D logo guide.

The build combined 63 PLA prints, a steel armature, a steel base plate and an airbrushed finish matched to the brand guide.

6 ft 7 inStatue height
About 200 lbCompleted weight
63Printed pieces
45 rollsPLA filament
Request Project Pricing
Digital Sculpting3D PrintingMetal ArmatureAirbrushing
Buster the Pothole Man at the trade-show booth.
Buster the Pothole Man at the trade-show booth.
01Design development

A logo guide became the starting point for the character

Buster, the Pothole Man, was created as a trade-show model for the Aquaphalt brand. His debut took place at the National Pavement Expo in Charlotte, North Carolina.

The customer supplied a 2D logo guide rather than a finished 3D model. WhiteClouds developed the digital figure, working to retain the cartoon character’s appearance while resolving its proportions in three dimensions. Customer feedback led to revisions before final approval for printing.

The customer’s original Pothole Man logo.
The customer’s original Pothole Man logo.
Character artwork and design feedback.
Character artwork and design feedback.
The approved 3D Buster design.
The approved 3D Buster design.
02The project

A steel-supported figure assembled from 63 prints

Buster’s 63 printed pieces required just under 1,900 accumulated printing hours and approximately 45 rolls of PLA filament.

The team assembled the figure with an internal steel armature mounted to a steel plate for stability. Expanding foam filled the interior around the structure, supporting the otherwise hollow printed shell.

The lower figure during printed-part assembly.
The lower figure during printed-part assembly.
Buster during assembly and surface preparation.
Buster during assembly and surface preparation.
03Scenic finishing

Brand colors, skin tone and the hat-and-bucket logos

A polymer smoothing coat evened out printing imperfections before the final finish. The airbrush artist mixed the colors to the codes in the Pothole Man brand guide, including Buster’s skin tone and company colors.

The surface received an automotive-grade finish and clear coat. Logo stickers on the hat and bucket completed the brand details using the customer’s supplied artwork.

Smoothing the printed figure.
Smoothing the printed figure.
Finished hat, face and bucket details.
Finished hat, face and bucket details.
Aquaphalt logo on the back of Buster’s hat.
Aquaphalt logo on the back of Buster’s hat.
04Finished project

A life-size mascot for the trade-show booth

The completed Buster stands 6 feet 7 inches tall and weighs approximately 200 pounds. The figure translated the familiar logo into a physical brand display for the National Pavement Expo.

WhiteClouds’ scope included the 3D design, printed construction, internal supports, surface preparation and painted finish.

The finished Buster statue before shipment.
The finished Buster statue before shipment.
The completed 6-foot-7-inch Pothole Man mascot.
The completed 6-foot-7-inch Pothole Man mascot.

Turning a 2D mascot into a display?

Send the logo guide, character artwork, desired dimensions, event schedule and display requirements.

Get a Free Quote