3.5-Foot 3D-Printed Dobby Character Model
WhiteClouds produced a 3.5-foot Dobby character model, combining digital design, FDM printing, hand finishing, airbrushing, and a handmade garment.
- Finished Height
- 3.5 feet
- Designer
- Jack Staley
- Production Time
- About 40 design and 300 print hours
- Print Material
- Six rolls of PLA
WhiteClouds produced a 3.5-foot Dobby character model designed by Jack Staley. WhiteClouds spent approximately 40 hours on design and 300 hours on FDM printing, using six rolls of PLA filament. Hand finishing, airbrushing, and a handmade body covering completed the physical character.
A digital character translated into a human-scale figure
At 3.5 feet tall, the finished model brings Dobby's distinctive proportions to human scale.
The completed Dobby display model
Printed geometry, hand finishing, pose, and handmade clothing come together in one display.
Planning a custom character or statue?
Share the character, approximate size, viewing distance, indoor or outdoor setting, deadline, shipping destination, and available artwork.